A Grading and Erosion Control (GEC) Permit is required prior to clearing, grading, excavation, filling, and other land disturbing activities. GEC Plans and CSWMPs must be developed and approved prior to GEC Permit issuance.
Requirements
Any private or public construction site with construction activities disturbing one or more acres, or construction activities that are part of a larger common plan of development or sale that disturb one or more acres is required to obtain a City GEC Permit. Construction activities are defined in the definitions section in Chapter 1 of the Stormwater Construction Manual.
Construction activities involving the following will also trigger the requirement for a GEC Permit:
- Any grading or construction within an open drainage channel as determined by the review engineer.
- Any time a Permanent Control Measure is constructed or substantially modified, to be defined as involving non-maintenance related activities. Adjustments or modifications to the control structure plate will not trigger the requirement for a GEC Permit.
- On any site as deemed necessary and required by the SWENT Manager.
Sites meeting the above criteria must control erosion and prevent the transport of sediment onto adjacent properties, public rights-of-ways, streets, storm drainage facilities, channels or any other public or private facilities.
When there is a change in ownership for a parcel covered by an active GEC Permit (e.g. single family residential lot(s) or individual commercial lot(s) within a larger development), the new owner must accept responsibility for compliance with the original GEC Permit for their parcel(s). This is accomplished by obtaining an Associate GEC Permit. Associate GEC Permit applications must be submitted to the Stormwater Enterprise for approval prior to initiation of construction activities on such parcels.
Permit applications are handled through the ACA Portal
GEC Accela Application Manual | Associate GEC Accela Application Manual | GEC Inspector Areas
If you experience any technical difficulties or need assistance, please call 719-492-5161.
For additional information, please reference the user manual (manual will be updated as more information becomes available):
ACA GEC Permitting User Manual (to be added)
GEC Permitting Fees
Fee Type | Space | Fee Amount |
---|---|---|
GEC Permit | Less than 1 acre | $550 |
GEC Permit | 1 acre to 5 acres | $1,100 |
GEC Permit | Greater than 5 acres | $3,850 |
GEC Permit - Start without passing Initial Inspection | Less than 1 acre | $1,100 |
GEC Permit - Start without passing Initial Inspection | 1 acre to 5 acres | $2,200 |
GEC Permit - Start without passing Initial Inspection | Greater than 5 acres | $7,700 |
GEC Permit - Start without approved GEC Plan and CSWMP | Less than 1 acre | $1,650 |
GEC Permit - Start without approved GEC Plan and CSWMP | 1 acre to 5 acres | $3,300 |
GEC Permit - Start without approved GEC Plan and CSWMP | Greater than 5 acres | $11,550 |
AGEC Permit | Fee per lot | $110 |
Permit Reinstatement Fee (after SWO) | $550 | |
Permit Transfer Fee | $550 |
GEC Permit Process
For additional information on how to obtain a GEC Permit or Associate GEC Permit, please reference the Stormwater Construction Manual.[SW1] A flowchart depicting the major steps in the process to obtain a GEC Permit is included below: